Daily Necessities Shelves Selection and Operation Guide
1. Material and structure selection
Mainstream Material Comparison
Material Type
Cold-rolled steel
Yield strength ≥ 245MPa, surface electrostatic spraying, single layer load-bearing 200-500kg, suitable for warehousing and batch storage
Supermarket warehouses, logistics transit centers
Aluminum alloy
characteristic
6063-T5 profile, salt spray resistance ≥1000 hours, lightweight design (weight reduced by 40%)
Adaptieve scenario's
High-end stores, pop-up store display racks
Steel and wood hybrid
Steel frame bearing + wooden shelves, combining practicality and display aesthetics
Home experience store, cultural and creative space
Key Parameter Specifications
The adjustable range of the floor height is 0.8-1.8 meters, suitable for products of different specifications.
2. Scenario Adaptation Solution
Detailhandelscenario's
Convenience stores: 1.5-meter lightweight shelves are used, along with wall-mounted shelves, to display high-frequency items such as chewing gum and chocolate.
Supermarket daily chemical area: Double-sided island shelves (1.2 meters long and 1.8 meters high) are used, along with LED light strips (4000K color temperature) to display laundry detergent, bath towels and other products.
Magazijn
Drive-through steel racks (2.4m high x 3m span), with a single-layer load-bearing capacity of ≥5 tons, support for forklift operations, and increase inventory turnover by 40%;
Moisture-proof design: A 150mm polyurethane insulation layer is installed at the bottom of the shelf, and a temperature and humidity sensor (±0.5℃ accuracy) is used to monitor the environment.
Folding four-layer shelf (empty thickness 0.3 meters), with adjustable layer height, suitable for seasonal storage;
Anti-dump fastener design improves lateral stability by 50%.
3. Operation Optimization Strategy
Display techniques
Placing high-profit products at the golden sight height of 1.5 meters can increase sales by 25%;
Themed displays (such as seasonal limited areas) are combined with 3D virtual fitting screens to enhance the experience.
Safety Management
Check the tightness of shelf bolts every month, and the anti-loosening design must pass the 8-level earthquake resistance test;
50mm thick rubber anti-collision strips are installed on both sides of the channel to reduce transportation damage
The vertical deviation of the column is ≤1/1000, and the horizontal error of the beam is <2mm (laser calibration);
