Door and Window Shelves Selection and Configuration Guide
1. Shelf classification and core parameters
Warehouse racking
Drive-through racking: Suitable for storing full boxes of door and window profiles, with a single-layer load-bearing capacity of ≥5 tons, column spacing of 2.4 meters, and supports level 8 earthquake resistance.
Cantilever racking: Suitable for special-shaped door and window components, with adjustable arm length (0.6-1.5 meters), a single arm load-bearing capacity of 300-800kg, and is suitable for vertical storage of aluminum profiles.
Modular combination rack: Made of aluminum alloy profile (40×40mm cross-section), supports embedded lighting system, has a color temperature of 4000K, and can dynamically display the opening and closing effects of doors and windows;
Quick-detachable booth: Double-layer frame (1.5m long x 2.3m high), suitable for displaying new products such as thermally-insulated aluminum doors and windows, sliding windows, etc., with a single-piece assembly and disassembly time of ≤10 minutes.
2. Material and structural specifications
Material selection
Scénarios adaptatifs
Aluminum alloy profiles
6063-T5 model, tensile strength 160-205MPa, surface anodized, salt spray resistance ≥1000 hours
Display shelves
High-end showrooms, outdoor pop-up stores
Yield strength ≥245MPa, surface electrostatic spraying, suitable for heavy doors and windows storage
Factory warehouse, logistics transit center
Steel and wood mixture
The bottom steel frame bears the weight + the top wooden layer combines functionality and design
Home furnishing stores and experience stores
Key Metrics:
The vertical deviation of the column is ≤1/1000, and the horizontal error of the beam is <2mm (laser calibration);
The display shelf height can be adjusted from 0.8 to 1.8 meters to suit different door and window specifications.
3. Intelligent Management Solution
Warehouse Management
characteristic
The WMS system integrates RFID tags to automatically record the entry and exit of door and window profiles, with an inventory accuracy rate of ≥99.7%;
AGV robots work collaboratively, increasing the average daily throughput of a single warehouse by 40%.
Store Interaction
Embedded touch screen (4K resolution) displays door and window performance parameters and supports 3D simulation of installation effects;
LED dynamic lighting effect system (color temperature 3000-6000K adjustable) accurately restores the material details of doors and windows.
4. Safety and Acceptance Standards
Anti-collision design
Anti-collision corner guards (rubber material, thickness ≥50mm) are installed on both sides of the shelf aisle to reduce damage caused by forklift collisions;
The single pallet weight limit on the top of high-rise shelves is ≤200kg, and on the bottom floor is ≤500kg.
cold-rolled steel
Acceptance Criteria
The depth of the anchor bolts is ≥150mm, and the spacing between expansion screws is ≤800mm;
Grounding resistance ≤ 10⁶Ω, in compliance with IEC 61340-5-1 anti-static standard.
Factory warehouse: Through-type cold-rolled steel racks (2400×800×12000mm) + anti-slip brackets, suitable for storing whole boxes of thermally-insulated aluminum profiles;
Brand Showroom: Aluminum alloy modular display racks + intelligent lighting system, a single booth can display 8-12 sets of door and window samples;
Home Furnishing Store: Steel-wood mixed shelves (120×40×200cm) with removable partitions, allowing for quick changes of seasonal themes.
5. Typical Configuration Scheme
Factory warehouse: Through-type cold-rolled steel racks (2400×800×12000mm) + anti-slip brackets, suitable for storing whole boxes of thermally-insulated aluminum profiles;
Brand Showroom: Aluminum alloy modular display racks + intelligent lighting system, a single booth can display 8-12 sets of door and window samples;
Home Furnishing Store: Steel-wood mixed shelves (120×40×200cm) with removable partitions, allowing for quick changes of seasonal themes.
